The History Of Powder Coating: Houston

Powder coating has become a huge industry in the few decades since its inception. Used by oil and gas companies, commercial real estate, city sewage systems, and private residents, the needs for powder coating in Houston are vast. Powder coating was invented as a solution to the many problems the liquid finishing industry encountered. From the wet coatings not lasting long enough, harmful release of volatile organic compounds from the liquid solvents, and the high costs of safety and pollution control, liquid coatings have become more problematic in today’s society.

European companies in the 1940s were under pressure to find more environmentally friendly alternatives to liquid finishes, as utilizing flame spraying to melt the coatings onto the metal was immensely dangerous. It was in the 1940s that Dr. Erwin Gemmer came up with a method to fluidize the bed application for thermostatic resins on metal as an alternative to the flame spraying method. This “new” method of powder coating could be applied to new or used parts that were properly cleaned, coated, and then put in a powder coating oven for 2-4 hours. The next 4 decades saw many improvements to Dr. Gemmer’s method and by the 1980’s powder coating in Houston exploded as it was environmentally friendly, produced little waste, and was cost efficient. These days, powder coated items can be cured in as little as 10 minutes (depending on the thickness of the metal), making powder coating pipes, furniture, and other items more efficient than ever.

As stated in many articles before, Houston Powder Coaters abrasively blasts a significant amount of its projects due to its deepest anchor-profiling results. This type of “surface preparation” in addition to the fusion- bonded (heat) interlacing properties of the powder produces the highest-level adhesion. This means that the powder coating in Houston has achieved the highest level of durability with the smallest environmental footprint.