Innovative Coating Solutions

Fusion Bonded Epoxy Coatings

Houston Powder Coaters offers a triple-application high-performance coating system designed for internal and external pipe surfaces.  With a combination of corrosion and chemical resistant properties required in high temperature and elevated pressure environments, this protective coating system also achieves optimal levels of strength and flexibility to minimize wear and fatigue.  Furthermore, the combined applications provide a smooth and consistent finish that allows for reduced frictional drag and enhanced flow dynamics.  This in turn diminishes the effects of shear dispersion and molecular diffusion resulting in improved paraffin mitigation.

Interior / Internal Coatings 

The phenolic primer is preparatory anti-corrosive basecoat that greatly inhibits corrosion in oxygenated atmospheres.  Furthermore, this thin layered protective coating is resistant to CO₂, H₂S, CH₄, brine, and petroleum distillates at elevated temperatures and pressures, making it a preferred choice of engineers and operators.

The second internal pipe coating is a fusion bonded epoxy that allows for a higher level of thickness to be obtained in single pass processing.  Through its chemical cross-linking, the thermoset polymers create a hardened finish that is not only chemical resistant, but abrasion resistant.

Exterior / External Coatings

As the curative properties of the fusion bonded epoxy allows for a thicker build-up of protective resin and hardener components, this external basecoat interlaces with the metal substrates’ anchor profile to create a hardened shell that greatly outperforms other coating systems.

Finally, a fusion bonded high-performance polyester is applied sealing the base coatings resulting in improved weatherability and UV degradation protection.

Marine Coatings

Marine coating applications must stand up to the harsh saltwater environments of southeast Texas and the Gulf of Mexico.  The sun, the waves, and the storms combine to ruin any decorative finish, by corroding parts above and below deck.  Houston Powder Coaters will help extend the life and look of your boat by refinishing T-tops, leaning posts, railings, swim platforms, extrusions, and more.

To remove the oxidation on weather-beaten aluminum pieces, HPC will abrasive-blast or hand-etch each part, ensuring a clean surface from which to coat.  After preheated to allow for outgassing, the pieces will then undergo a thick application of powder to build-up a protective barrier to guard against future salt and spray.  Once in the oven, the powder will fusion-bond with the metal to ensure a durable yet elegant finish.  With a variety of colors, glosses, textures, and effects to choose from, you can match your current equipment or achieve a fresh look.

Architectural Design

Houston has seen an influx of new construction for residential, commercial, and industrial facilities.  This work includes the fabrication and assembly of miles of railing, banisters, light poles, awnings, drive-gates, and perimeter fencing.  Houston Powder Coaters can easily handle these large jobs that can span weeks, months, and even years.  Furthermore, HPC will assist project turnarounds by coating the aluminum extrusions used in windows, doorframes, building facades, bathroom, kitchen, and electrical fixtures.

Stay at the forefront of architectural trends by having special formulated colors to match.  Houston Powder Coaters works with the top powder manufacturers in North America to offer premium coatings that are extremely durable, aesthetically pleasing, and environmentally responsible.  These electrostatically applied powders are specially formulated for exterior (and interior) aluminum, steel, and galvanized metal applications.

Houston Powder Coaters offers a full range of protective baked-on coatings that integrate into the metal, ensuring a durable yet elegant protective finish.  With over 130 colors in stock and hundreds more to choose from, HPC will assist in finding the proper application for your project’s needs.

Bridges / Road Barriers / Street Signs

In addition, Houston Powder Coaters offers a variety of protective coatings for light poles, guard rails, posts, barriers, road signs, and fencing that border high-traffic areas.  These chip-resistant and high-weatherability coatings will take the abuse that highways and roadways offer.  Call HPC to inquire about a variety of thermoplastic coatings that are more resilient to road debris abrasions.

Restaurants / Resorts / Stadiums / Public Venues

Houston Powder Coating proudly serves the finer restaurants, bars, hotels, and resorts of the Greater Houston area.  If your facility has an outside eating area, pool deck, courtyard, or balcony, then let Houston Powder Coaters improve the quality of your customers’ experience by refinishing ornate patio tables, chairs, ottomans, benches, fences, gates, railings and banisters.

Schools / Universities / Religious Campuses

Houston Powder Coaters specializes in the coatings of “anything metal”.  Shelves, book carts, tables, playground sets, light poles, stadium signs, bike racks, weight room equipment, trash cans, ramps, rails, bleachers, goal posts, and much, much more.  Houston Powder Coaters offers a full range of protective baked-on coatings that integrate into the metal, ensuring a durable yet elegant protective finish.